Minggu, 17 Oktober 2010

PREPARE AND COOK MACARONI.

Macaroni is a product of wheat prepared from a hard, clean, glutenous grain. The grain is ground into a meal called semolina, from which the bran is excluded. This is made into a tasty dough by mixing with hot water in the proportion of two thirds semolina to one third water. The dough after being thoroughly mixed is put into a shallow vat and kneaded and rolled by machinery. When well rolled, it is made to assume varying shapes by being forced by a powerful plunger through the perforated head of strong steel or iron cylinders arranged above a fire, so that the dough is partially baked as it issues from the holes. It is afterwards hung over rods or laid upon frames covered with cloth, and dried. It is called by different names according to its shape. If in the shape of large, hollow cylinders, it is macaroni; if smaller in diameter, it is spaghetti; if fine, vermicelli; if the paste is cut into fancy patterns, it is termed pasta d'Italia. Macaroni was formerly made only in Italy, but at present is manufactured to a considerable extent in the United States.

Good macaroni will keep in good condition for a long time. It is rough, elastic, and hard; while the inferior article is smooth, soft, breaks easily, becomes moldy with keeping. Inferior macaroni contains a large percentage of starch, and but a small amount of gluten. When put into hot water, it assumes a white, pasty appearance, and splits in cooking. Good macaroni when put into hot water absorbs a portion of the water, swells to nearly double its size, but perfectly retains its shape. It contains a much smaller amount of gluten.

Do not wash macaroni. Break into pieces of convenient size if it is long. Always put to cook in boiling liquid, taking care to have plenty of water in the saucepan (as it absorbs a large quantity), and cook until tender. The length of time required may vary from twenty minutes, if fresh, to one hour if stale. When tender, turn into a colander and drain, and pour cold water through it to prevent the tubes from sticking together. The fluid used for cooking may be water, milk, or a mixture of both; also soup stock, tomato juice, or any preferred liquid.

Macaroni serves as an important adjunct to the making of various soups, and also forms the basis of other palatable dishes.

Jumat, 15 Oktober 2010

Self Installation of Auto Sound System can Save Serio

us Cash

If you are seriously hoping to save a significant chunk of change when it comes to your auto sound system, you should consider saving on installation. Under ordinary circumstances I urge people to be very, if not overly cautious when it comes to installing your own auto sound systems. The thing is, that some people really are talented when it comes to activities such as this. Beyond talent, some people have frightening skills with electronics and if you are one of those, then by all means consider the money you could save yourself (or the extra money you'd have to invest in your system?).

We all know that money doesn't grow on trees and when you've been saving up for quite a while to get the sound system you really want it's a serious joy killer to have to wait another month or two in order to save up enough money to cover the cost of the installation of your sound system. If you or someone you know and trust (trust being the operative word in this instance) can do the work, it makes no sense from a fiscal point of view to pay someone else to do it.

That being said, if there are any doubts about your skill or experience you might want to at the very least get a second opinion or price installations in your area to see if it might actually be worth saving a little more. Time is another important issue when it comes to the installation of an auto sound system. It doesn't matter how capable you are of making the installation if you simply lack the time to do it. In cases such as this it would have been just as wise to go ahead and pay someone to make the installation. It makes much more sense to me than having the system sitting in a box for months on end while you wait for the time to get it taken care of.

I am one of those people who firmly believes that time is money. Time lost from work is expensive. This is especially true when the times of 10 or more people are lost. It adds up quickly no matter if you have a small or a large company. Time is also (unfortunately) the one commodity in life that you can never recover. No matter how hard you try you cannot recapture time that has been lost. If you have children you know exactly what I'm talking about (particularly if your children are either teens or grown and gone). You cannot recover lost time so make sure you aren't wasting your time by trying to install an auto sound system that is beyond your abilities.

Don't fret though. Most of us find that at some point in our lives we are limited by either time or money if not both. If everything was quick and easy we wouldn't really have anything worth working for would we? Consider all your limitations when planning and purchasing your auto sound system and make sure that the system you select falls squarely within your ability to install, your time limit for installation, or your price range for affording to pay for the installation. Whether you decide to do your own installation or have a professional installation of your auto sound system the prize is the superior sound quality you will be able to enjoy.

PPPPP

580

Rabu, 13 Oktober 2010

Independent Car lease companies

To lease, you have two possible choices: either lease through a dealer’s
finance source or through an independent lease company.
A conventional dealer has a captive finance source, which can be the car
manufacturer’s financial company, such as BMW Financial Services, Honda
Motor Credit or General Motors Acceptance Corporation (GMAC), or a major
national bank such as Chase Manhattan.
Independent lease companies are no financial obligation to any single
one manufacturer financing source, but work with dealers anywhere in the
country.

So which one is better?

Conventional dealers provide better lease-deals on limited-time promotions.
Factory-subsidized cars that have subvented money factors and residuals are
very attractive lease deals and can be very hard to beat anywhere else.

Independent lease companies can offer you unbiased and professional advice
on vehicle selection regardless of make and model. This is because they are
not tied to a single manufacturer or financing source, unlike conventional
dealers who have to sell specific models. They can also be more flexible
regarding negotiating lease terms like residual value and mileage.
Ultimately, if you prefer a more personal and customer-oriented
relationship with your leasing agent, then you will do well with an
independent leasing company.

(Word count: 197)

PPPPPPP

Selasa, 12 Oktober 2010

Invoicing with Autoresponders

If you have recurring invoices that you send out, you
can easily automate this process with
autoresponders. Many business
owners find that they spend a good portion the day
sending out invoices, or trying to collect on unpaid
invoices! This can easily eat into the time that you
could be spending generating new business.

If the amounts invoiced are the same each month,
and due on the same day each week or month, you
can easily automate the invoicing process with the
use of an autoresponder. Many shopping carts that
have autoresponders built in work well for this.
Others may take a little time to set up, but in the
end, they will save a great deal of time overall.

Get extra usage out of the automated invoicing
process by adding small messages to the invoices
that alert these clients to new products or services
that you offer. Think about your phone bill – doesn’t
your phone company send out additional sales
material with each bill? There is no reason you
shouldn’t use this same marketing technique with
your autoresponder invoices!

(word count 180)

PPPPP

Minggu, 10 Oktober 2010

The Basic Guide To Choosing Golf Clubs

Choosing a decent set of golf clubs is a very important part of maturing in the game. Therefore you should consider many different things when buying the clubs. If you have no previous experience with the selection and purchase of golf clubs, you should be glad that you have stumbled across this article. You will find out some of the most helpful advice when buying clubs, as well as general helpful information that any golfer should know. If you are very thorough in your search for the right golf clubs, you will be glad that you took the extra time and research to find out the information needed to make that choice.

Firstly you should familiarize yourself with the types of golf clubs that you need. There are 14 clubs total for each set, but they can all be categorized in the following: irons, woods, and putters. Irons are the ones that are used for very distance specific golfing work, and the distance is determined by the size and weight of the head. You are provably most familiar with these from using them on the golf course. Woods are used to achieve very large distances with a slightly lower accuracy level than irons. You will have to hit a ball a few times with a wood to get an idea of how far it will go with your stroke. Putters are used for shorter strokes, and strokes that require a higher level of accuracy than the other clubs can provide. In order for your golf club collection to be complete (or even functional within the golf game), you will need to have at least one of each of these.

If you are just getting started with golfing, then you probably won’t want to buy a full golf set. It is a better idea to buy adjustable clubs that can change into different types. You may be able to change the 14 clubs into just 5 or 6. This not only means less to carry, but also that you will be able to tweak your clubs to perfection after you purchase them. This is the best way to get a feel for your needs when it comes to the specific statistics of the club. Once you have pretty much decided on certain settings, you may decide to buy golf clubs that are permanently set like that. Until then, you should be perfectly fine with adjustable clubs, especially since you are a beginner.

Graphite is something that many golfers are split on. The advocates of graphite say that it is lighter, easier to swing, and allow for more powerful strokes because of this. However, there are many who disagree with graphite and will remain steel golfers for life. They maintain that graphite clubs are unnecessarily expensive, without giving noticeable benefits. Some prefer the stiffness of steel over the comparatively flexible graphite clubs. If you have a fast stroke or you prefer to have some weight in your club, you will be fine sticking with steel clubs. After all, there’s nothing better than really having a heavy club that you can feel the momentum in when you swing.

Until you are an advanced golfer, you won’t have to worry about things like spin and head weight. The best thing you can do as a beginner is to familiarize yourself with all aspects of the game, and become very skilled with the equipment that you already have. Doing this will allow you to make smart choices for the future, and therefore constantly improve your golf game. Until then, just stick with what you have and master it. You will be glad in the future when you have not wasted huge amounts of money on equipment that is far more fancy and technical than you could possibly need. This is something that many golfers regret, and something that you can avoid.

PPPPP

Word count 653

Jumat, 08 Oktober 2010

Coin Collecting 101: What Type of Coin Should You Collect?

Coin collecting is a fun hobby to start and the thrill of hunting for old coins is enough for many people to continue doing it. Other people consider coin collecting an investment, something they can receive a profit from. If you are one of those people, then you can find several types of coins in this article that will help you determine what others are looking for.

Most coin collectors will look for only a specific kind of coin that will make their collection more valuable and interesting to buyers. Others are collecting for sentimentality and are looking more at the coin’s uniqueness.

Series collectors are those looking for a series of coins that mark every year and every design change made in that coin.

Type collectors are those people who are looking to get one of each coin where there were/are changes made.

Ancient coin collectors are those people looking for coins spanning the years 650 BC – 450 AD. This is the time when coins were invented and there were silver, gold and bronze versions made. It also marks the time when Roman emperors were the rulers and most of them feature famous Roman emperors, Roman towns, or gods.

Token collectors are those who are looking for different kinds of tokens that were used in exchange for real money when there was a lack of coins. These tokens were used as local currency even if the government had not given permission for them to be used.

Coins are also graded. A coin’s grading depends on its condition and the price of the coin will rely heavily on that grade. It is important for a coin collector to know how to grade a coin to make sure that he is not swindled by individuals looking for a quick profit.

“Uncirculated” coins are those coins that are not showing any wear and tear or to referred to as “in mint condition”. A mint state (MS) grading depends on a coin’s luster, contact marks, hair lines and overall appeal. A coin can have a grade ranging from MS-60 (dull luster) to a flawless MS-70. Although MS-70 is considered unobtainable, a grade of MS-65 and higher will make a coin’s price shoot up.

Circulated coins are more forgiving, they do not take into consideration the amount of scratches and dirt a coin has gathered along the years. Grades for circulated coins will vary. AU (about “uncirculated”), EF (extremely fine), VF (very fine), F (fine), VG (very good), G (good), AG (about good), F-2 (fair) and P (poor) are used as indication of how much a coin is worth.

These grades are dependent on a circulated coin’s luster, visible wear, design elements and visibility of letters and numerals. Unlike “uncirculated” coin’s grades, these grades do not dramatically lower a coin’s value. This is wonderful for people who are looking just to complete a collection and do not care about a coin’s mint condition.

Pricing of a coin will usually be determined by a coin’s supply and demand. Very low supply and very high demand will make a coin’s price higher; however, high supplies of the coins will depreciate a coin’s value.

Demand is usually established by coin dealers where they take into consideration the number of people wanting to buy or sell the coins. Once a coin becomes difficult to find, coin dealers will usually make its price higher so that people are inclined to sell extra copies of their coins.

Grading and pricing a coin usually takes a lot of experience to master. Although there are several tips and guidelines to look for in grading a coin, only professional dealers have the final say on how much a coin is worth. It does not hurt to know this grading is done and why your coin was graded differently from what you thought.

Coin collecting is not really about investment, it should be a fun and thrilling hobby. While the overall goal of a coin collector is to complete a set of coins, learning what to look for in a coin is important to make sure that no one can take advantage of your need to complete a particular set.